Changing the Time and Date on your Norstar Telephone

Please note, that all programming must be done from a M7310, M7324, T7316, T7324 Model Telephones. (Any phone that has more than 1 row of 8 buttons on the side is OK)

It is important that you understand how to navigate through the Norstar Menu's.

1 - Press FEATURE * * T I M E (**8463 , or **23646) The display shows	Password     RETRY
2 - Press ADMIN <23646> If you used (**TIME to login, skip to step 5)	Hour: 01 NEXT CHANGE
3 - Press NEXT until the display reads TIME AND DATE 4- Press SHOW, then press CHANGE softkey   5- In this example, you are changing the time to 1:30 .p. m. Press CHANGE The display shows	Hour:_ CANCL
NOTE:  Press the dial pad button to enter the hour. Use two digits for all hours. The clock in the display will show either one or two digits. NOTE:  The display will prompt you to enter A.M. or P. M. Press CHANGE and OK to select P.M.	AM   OK CHANGE
6 After you have entered in the hour Press NEXT The display shows	Minutes: 00   NEXT CHANGE
7 Press CHANGE The display shows NOTE: If you are only changing the time and not the date, Press Rls to end your session. In this example, you are changing the date to July 15, 2001	Minutes: __ CANCL
8 After you enter in the minutes Press NEXT. The display shows	Year : 99   Next Change
9 Press CHANGE The display shows > Press the dial pad to enter the year.	Year:01 CANCL
10 Press NEXT The display shows	Month: 01   NEXT CHANGE
11 Press CHANGE Press the dial pad to enter the month. Use numbers for the months: 01 January; 12 is December.
12 Press NEXT The display shows	Day: 01   NEXT CHANGE
13 Press CHANGE The display shows	Day: __ Cancl
Press the dial pad buttons to enter the day Press Rls to end your Session.

Feel Free to donate if this was helpful !

* Back to Tech Support *